star micronics tsp143l | star micronics tsp100 vs star micronics tsp143iiu vs star micronics mpop which to buy
The WiFi Power Pack is designed to make any Star LAN interface printer “wireless” in a cost effective way without a lot of messy cables. This, in turn, enables the Star printer using the WiFi Power Pack to connect with tablets, smart phones and other portable electronic wireless devices.
One attribute that grabs the user’s attention is TSP650II BTi’s lightening fast print speed. Capable of printing 60 receipts per minute (300 mm/sec), the TSP650II BTi offers unrivalled processing power and outstanding data throughput. Equipped with easy “drop in and print” paper loading, small footprint and reliable guillotine cutter, the TSP650II BTi is a welcomed addition to any POS system. With exceptional performance, functionality, Bluetooth accessibility and iOS support, the TSP650II BTi embodies Star’s motto of “Always Leading- Always Innovating.”
The SM-S220i bluetooth receipt printer is compatible with Windows, Android, and iOS, ensuring easy printing regardless of your preferred operating system. The 2-inch print width is ideal for credit slips or receipts, and the 3 inch per second print speed is fast enough for most mobile or low volume sales operations. A serial port on the side of the SM-S220i supports connection to mobile devices but can also act as a pass-through for PIN-pad, NFC, or other payment peripherals.
The POPPack design provides a flexible option in black or white with the extra security required within a busy retail or hospitality environment. This makes the solution ideal for pop up stores, micro merchants as well as larger scale retailers who want to securely store or transport the mPOS station at the end of trading.
The TSP650IIcloudPRNT thermal printer retrieves and prints orders from any online ordering service integrating Star’s communication protocol. The online ordering service will be able to communicate directly to the printer, eliminating the need for an extra tablet to send orders to the printer.
With the “Network Card…” report from the printer in-hand, log into your POS Lavu Control Panel at admin.poslavu.com. Navigate to Settings > Printers/KDS. The IP Address on the “Network Card…” report should match, if it does not then utilize the links below to change the IP Address on the printer or in the Lavu Control Panel:
This is the answer for vendors at Farmer’s Markets, craft shows, etc. Armed with the Paypal app , this receipt printer and a cash drawer that opens with a signal from the printer and a Goal Zero Yeti 400 I can run all day print receipts, kick the cash drawer AND run a 12V and a USB fan for a little air movement on 20% of the battery pack’s capacity. Blue tooth synching has worked every time, turn on the printer, open the iPad, open the app and, voila, there it is. The printer connects immediately upon waking the iPad during a lull in the action. This will add a level of professionalism to your booth, makes you look like a serious vendor.
This printer is fast and has useable options. I use it with my iPad and Square credit card reader. You can also use it for POS or other systems or configurations. Using it with Square credit card processor I save paper because I only print the customer copy because all the other transaction data is accessed online. And when I tap print on my iPad it starts and completes the printing in just one second. I saw this printer being used at my local drug store with a different setup and it too works well. Give it a try and I think you’ll be glad you did.
While your printer is in pairing mode, tap the Star Micronics printer in the DEVICES list on your iPad. After a short pairing process, the printer will show as Connected, and the LED on the back of the printer will become a solid blue color:
Revolutionary ruggedised portable Bluetooth printer offering high connectivity and functionality at minimal cost. The SM-T300i is compatible with Apple™, Android™ and Windows™ devices, allowing the user to seamlessly migrate to another OS if required; with demo apps available on iTunes and Google Play .
The TSP100ECO, the world’s first ECO POS receipt printer, supports Star’s commitment to being ecologically responsible, while allowing Star to continue to provide a high-speed, software enriched economical choice for users. The TSP100ECO has been designed with an advanced power management circuitry which allows any user to reduce their printer current consumption by up to 75% compared to standard Star printers, making it the most economic printer in its class. Learn more about the TSP100ECO here.
High quality, fast printing now goes mobile. The Star SM-T300i thermal printer is designed to print standard three inch format receipts anywhere. Simply pair it with any Bluetooth SPP mobile device (Apple MFi certified), and print from a web browser based application running on your mobile device. IP54 certified with resistance to dust and splash, the Star SM-T300i thermal printer will withstand any element while going anywhere you go.
For cord-free printing, the Star Micronics Bluetooth receipt printer gets top marks. This printer allows you to print out customer receipts from nearly any location, thanks to lithium-ion battery power that lasts up to 8 hours. As a bonus, it has a configurable auto-sleep mode that allows it to automatically conserve energy.
This unit is still new and in the original box. I did not include a picture, as the outside of the box does not include that, and since Ebay did not have a stock picture of this unit, I photographed …
When the Pair and connect printer dialog opens, hold down the red Pair button at the back of the printer for 5 seconds. After 5 seconds, the green LED at the back will start to flash, indicating that the device is in pairing mode. Pairing mode lasts for 60 seconds.
Star’s SP700 BTi impact printer is specifically designed to function in the kitchen where heat and humidity can erode the type on a printed order. This fast, two-color printer offers crisp, easy to read type for quick viewing, clamshell design for easy paper loading and an embedded power supply for space efficiency. Available with Bluetooth connectivity, the SP700 BTi can support kitchens and back of house operations without wiring that can get in the way of its staff.
I use this with Square Register on a Samsung Galaxy Note (3 ?). Once it’s set up it plugs right into the USB On The Go adapter, app detects the printer, and I can print my customers their receipt! Very professional looking instead of just a text message or email URL, which many of our customers wouldn’t really know how to use. It seems like a high price to pay for such a small seemingly simple device but so far it appears to be a sturdy, lasting machine. A package of receipt paper lasts a long time. If things fall through it has a high resale value as opposed to some other devices (just check out eBay and Amazon used).
Star Micronics Cash Drawer Series showcases cost effective cash drawers that integrate seamlessly into any retail or hospitality environment. From traditional to mPOS, Star Micronics cash drawers offer a secure way to manage cash.
The only troubleshooting I had to do after, occurred after a Windows update. The port the 2nd starmicronics entry in Printers and Devices had changed port numbers. I just repeated step 6 and then made the 2nd starmicronics entry in printers and devices match that of the entry that is auto installed when you pair the printer the first time and I was golden. I’ve rebooted numerous times since then and it has retained the port.
TSP113U GRY. Introducing the TSP113U GRY, the first all-in-one receipt printer. Yes, all the parts and software are included in one box. To get you setup quickly, we’ve included an internal power supply, interface cable, power cable, complete mounting kits and a paper roll. To bring you the future of receipt printing now, we’re also including a full set of software utilities. Redesign your receipt without modifying your application. Add your logo. Add coupons. Preview receipts and enhance bar codes. Included operating system drivers allow for ‘Plug & Play’ automatic installation. But setup is not the only fast part. The TSP113U GRYis a fast printer. It’s the All-In-One-Box Miracle coupling amazing features and high reliability at an affordable price!
Compatible with multiple operating systems (Windows®, Android™, Linux, iOS), the SM-S220i is approved by Apple Inc. with MFi certification. The SM-S220i features easy set-up with simple front panel control allowing configuration for MFi or SPP modes.
The printer is fine but bluetooth connectivity has been an incredible challenge. We have probably wasted 20 hours wrestling with it in the few weeks we have had it. The Starprint utility can say it is not connected when it is … and vice versa. The Bluetooth says it is not connected yet we can print a receipt from the register. The delay communicating via bluetooth means we have to leave a key in teh till drawer rather than wait for it to eventually open even though we have adjusted the utility and timing. So, while the printer is fine, don’t go bluetooth because you can’t use a cable even if you want to as there’s no socket …. just bluetooth ! So, buy a cable printer version and be happier !
TSP143U GRY. Introducing the TSP143U GRY, the first all-in-one receipt printer. Yes, all the parts and software are included in one box. To get you setup quickly, we’ve included an internal power supply, interface cable, power cable, complete mounting kits and a paper roll. To bring you the future of receipt printing now, we’re also including a full set of software utilities. Redesign your receipt without modifying your application. Add your logo. Add coupons. Preview receipts and enhance bar codes. Included operating system drivers allow for ‘Plug and Play’ automatic installation. But setup is not the only fast part. The TSP143U GRY is a fast printer. It’s the All-In-One-Box Miracle coupling amazing features and high reliability at an affordable price.
A contemporary alternative to a traditional cash register or EPOS system, the mPOP offers a compact and sleek design with the ability to connect the mobile device of your choice – Apple, Android, Windows or Linux tablet or smartphone for simple Bluetooth pairing. The multiple functions and connectivity of the mPOP™ make processing customer transactions in retail and hospitality environments smooth and effortless.
Learn more here.
Star Micronics’ mPOP™, Mobile Point of Purchase is the first hybrid for tablet POS that combines a cash drawer and printer peripheral. With convenient Bluetooth and USB connectivity, this compact, stylish, yet fully integrated peripheral is an ideal solution for tablet and mobile device-based POS systems. Simply connect your preferred tablet or mobile device of choice and the mPOP™ transforms into a fully integrated POS system. The mPOP™ combines a two-inch thermal receipt printer with “Drop-In & Print” paper loading and a compact cash drawer with 4 bill and adjustable 6 or 8 coin slots. The hidden space under the removable coin till provides extra security for high-value currency, store checks, and credit card slips. For added security, a locking base bracket is included with the mPOP™ to ensure reliable mounting on countertops. Enhancing its functionality, the mPOP™ includes USB ports for charging external devices, optional plug and play barcode scanner, and a universal device stand. Compatible with all major operating systems (iOS, Android, and Windows), the mPOP™ works with any supported mobile software and payment system, allowing retailers the freedom of using various platform options. With Apple MFi certification, the mPOP™ can also connect easily and pair with the iPad®, iPhone®, and iPod touch®. Additionally, the mPOP™ includes a 2 year bumper to bumper warranty and is compatible with AllReceipts™, Star Micronics’ FREE digital receipt solution which is available to download on all iOS and Android mobile devices. Retailers can offer AllReceipts™ to customers by simply enabling AllReceipts™ from a Mac or Windows driver. For iOS and Android applications, developers will integrate this feature into their application using StarPRNT SDK. With multiple exit options for enhance cable management, the mPOP™ complements any countertop area for a visually appealing POS system. The functions and connectivity of the mPOP™ make processing customer transactions smooth and effective for small shops, cafes, florists, bars, and many more. Aesthetically simple and elegant, the mPOP™ provides the ultimate point of sale solution for the new face of mPOS.
Apple MFi Certified Bluetooth Interface Enables wireless printing from mobile devices via Apple MFi certified Bluetooth interface. Dual chip Bluetooth Supports all iDevices such as iPad®, iPhone®, and iPod touch® in addition to all Android and Windows devices.
Works flawlessly with the Square POS software. Was discovered instantly, and prints quickly and reliably. The ability to run off batteries is awesome, and i can see the included belt clip being useful, if REALLY geeky.
Star TSP100 Printer (USB Port / AutoCutter / Dark Gray). This printer has a Receipt Paper AutoCutter built in and is Compatible with the Square Stand Hardware USB hub! Each of our printers has been fu…
The key features of Bluetooth technology are its ubiquitous use in consumer electronics, low power consumption and low cost. The Bluetooth specification defines a uniform structure for a wide range of devices to connect and communicate with each other.
The printer is compact, prints clearly, and has absolutely no issue when printing a receipt for my Square sales. The fact that it is blue tooth meant I could put it anywhere in my home office that was convenient and not tied down by the length of a USB cord otherwise. I have it linked up to an old iPhone 4s phone and run credit cards using Square and print receipts easily. I’m so pleased that I paid some more money and got the blue tooth version.
A global manufacturer of POS hardware, Star Micronics has been supporting retailers for over 30 years to deliver efficient, reliable store solutions. At the forefront of product innovation and with a reputation for quality and reliability, we manufacture the largest range of POS and mPOS printers and accessories currently available.
I bought this printer for my business. I’m a mobile merchant. I works as advertised, worth every penny. Today almost everything is emailed but a printed ticket is always appreciated. Plus having all the proper tools gives you a professional image and enhances shopping experience for your clients.
A perfect match for Square Credit Card Processing. The printer arrived as described. Easy setup and user friendly. Printer has a metal case is very heavy duty. One can add a logo to the customer receipts. Arrived as described and within the stated delivery time.
The Star mPOP™ is a unique combined receipt printer and cash drawer, simple and elegant, yet loaded with intuitive design features. At just 10cm high and 30cm wide, the mPOP™ is easily transportable and offers a contemporary alternative to a traditional cash register or EPOS system. The mPOP can be easily secured on any counter top or or can be fixed under the counter.
Also available with Apple MFi certified Bluetooth interface, Star’s SP700 BTi can support kitchens and back of house operations without wiring that can get in the way of its staff. The SP700 BTi supports iPad®, iPhone®, and iPod touch® devices in addition to Android™ and Windows devices.
The TSP650II BTi’s “JustWorks” SSP profile makes the pairing process very simple to use. It allows for a quick connection without the hassle of a passkey or having to choose between iOS and Android modes. Quick and ready to use, no user interaction is needed to pair the TSP650II BTi. In addition, TSP650II BTi includes the ability to print receipts or data from a web browser-based application running on a mobile device wirelessly by configuring Star’s WebPRNT Browser. Once configured, the user simply pairs their mobile device to the TSP650II BTi, open the application on WebPRNT Browser and prints from the application.
Find the red Pair button located at the back of the printer, and hold it down for 5 seconds. After 5 seconds, the green LED at the back will start to flash, indicating that the device is in pairing mode. Pairing mode lasts for 60 seconds.
We were hesitant about getting this printer since it did not have an Off switch but so far that hasn’t been an issue since the printer itself hasn’t had the same errors we’ve been experiencing with an old receipt printer we were using without much success before.
Fulfillment by Amazon (FBA) is a service we offer sellers that lets them store their products in Amazon’s fulfillment centers, and we directly pack, ship, and provide customer service for these products. Something we hope you’ll especially enjoy: FBA items qualify for FREE Shipping and Amazon Prime.
[redirect url=’https://kreditfly.com//bump’ sec=’5′]