​​Ethernet Receipt Printer Reviews

​Ethernet Printers are terrific if you need to print from several iPads. Connect your printer to your Wi-fi Router with an Ethernet Cable. Check that your iPad and Printer are connected to the very same WiFi network. To Do this, go to your iPad settings. After that faucet WiFi, and select the appropriate network. To test your printer, most likely to Settings within the Square Register app and also tap printers.

To attach through Ethernet, plug one end of the Ethernet cable television right into your Wi-Fi router, and the various other end into your printer. See to it Square Register is connected to your Wi-Fi router's network. To connect a printer as well as cash drawer together to Register, plug your cash drawer into your printer. Then connect your printer to Register's accessory center.

For this specific configuration, you'll require to create a printer station. Printer terminals allow you mark particular tasks for your printers, like printing invoices, tickets, or stubs. With your printer plugged in, go to Settings, Printers, as well as Produce Printer Station. Enter a printer station name. Currently choose what you 'd like your printer to print. See to it you select at the very least one alternative. After that touch the printer selection food selection and select your printer. Test your printer by tapping Test Print. Then, tap Conserve. Your printer station settings are now conserved and also can be related to any connected printer.

ConnectionManufacturerModelSquare StandiPadiPhoneAndroid
BluetoothStar MicronicsTSP143IIIBiYesYesYesNo
BluetoothStar MicronicsTSP654IIBiYesYesYesNo
BluetoothEpsonTM-m10 BluetoothYesYesYesNo
BluetoothEpsonTM-T20II BluetoothYesYesYesNo
BluetoothEpsonTM-T88V (Bluetooth)YesYesYesNo
EthernetStar MicronicsTSP143IIILANYesYesYesYes
EthernetStar MicronicsTSP654LYesYesYesNo
EthernetEpsonTM-m10 EthernetYesYesYesNo
USBStar MicronicsTSP143IIIUYesNoNoYes
USBStar MicronicsTSP654IIUYesNoNoYes
USBEpsonTM-m10 USBYesNoNoNo
WiFiStar MicronicsTSP143IIIWYesYesYesYes

​​How do I connect my printer to Square?

Ensure that the printer is plugged into its electrical source.

Link one end of the Ethernet cable into Ethernet port. This is in the back of the printer, and plug the other end directly into the Wireless router.

After verifying these two connections, turn on the printer.

The printer will show a solid green LED light on the front panel. This indicates the printer has connectivity and is able to obtain an IP address from the Wireless router.

Make sure that the printer is plugged into its electrical source.

Be sure the printer and the iPad are linked to the very same network. To confirm this or alter your Wi-Fi network, go to the iPad's Settings and tap "Wi-Fi" situated in the left sidebar. Then pick the network that the router is relaying and click "Connect".

Exit the Settings.

Click the Square Application and open it up.

In the Square App, tap on the Admin Panel tab on the left side of the screen.
Click on "Settings" and then click on "Receipt" to see all the printers on the network.

It will show either the name of your printer.
Click the toggle button to the ON setting.

Then tap "Print Test Receipt" to make sure the printer is completely practical.

As Soon As the Print Test Receipt has printed you have successfully setup your printer with Square.